Q235/Q345/Ss400/A36/S235jr Structural Steel H Beam Steel Material

Sep 17, 2025

Leave a message

GBT706-2016Hot-Rolled-H-Beam.pdf

Set 1

Q: What's the key difference between Q345 and Q235?
A: Q345 and Q235 differ mainly in strength, composition, and application scope. Q345 is a low-alloy high-strength steel with a minimum yield strength of 345 MPa, while Q235 is plain carbon steel with 235 MPa yield strength. Q345 contains manganese, silicon, and other alloys that boost strength, making it suitable for heavy-load projects like high-rises and bridges. Q235 has better weldability and lower cost, ideal for light frames and ordinary construction. Q345 resists deformation better under pressure, while Q235 is easier to cut and bend for simple structures. The choice depends on load requirements and budget-Q345 for heavy duty, Q235 for general use.

Q: Are Ss400 and A36 interchangeable?
A: Ss400 and A36 are often interchangeable for general structural needs due to similar mechanical properties. Ss400 (JIS standard) has 235 MPa yield strength and 400-510 MPa tensile strength; A36 (ASTM standard) offers 250 MPa yield and 400-550 MPa tensile strength. Both have excellent weldability and formability, working with common welding methods. Ss400 is prevalent in Asia, A36 in North America, but their performance overlaps. However, projects specifying strict regional standards (e.g., JIS-only or ASTM-only) require the matching grade. We provide test reports to confirm equivalence, so they can replace each other in most non-specialized applications.

Q: Can S235jr be used for outdoor structures?
A: Yes, S235jr is suitable for outdoor structures with proper protection. As an EN-standard steel, it has room-temperature impact resistance ("jr" grade), handling temperature fluctuations better than some alternatives. Its 235 MPa yield strength meets outdoor structural demands like canopies or small bridges. But S235jr has no natural corrosion resistance-its hot-rolled mill scale only offers temporary protection. For outdoor use, treat it with galvanizing, anti-corrosive paint, or epoxy coating to prevent rust. In dry climates, painting suffices; in coastal/salty areas, galvanizing is recommended. With protection, it lasts 15+ years outdoors.

Q: What projects use A36 H beams?
A: A36 H beams are widely used in North American and international projects. They're a top choice for commercial buildings (shopping malls, offices) due to cost-effectiveness and strength. Industrial applications include workshop frames, crane rails, and equipment supports. Infrastructure projects like pedestrian bridges and highway guardrails rely on A36's durability. Residential construction uses them for steel-framed homes and garage beams. A36's compliance with ASTM standards makes it acceptable for government and private projects alike. Its versatility and availability make it a staple in construction where moderate strength and weldability are needed.

Q: Are Q345 beams easy to weld?
A: Yes, Q345 H beams are easy to weld with proper techniques. Though it's high-strength steel, its low alloy content (manganese, silicon) ensures good weldability. It works with common methods: manual arc welding (MMA), MIG, and submerged arc welding. For thicknesses under 25mm, no preheating is needed; thicker sections just require mild preheating (100-150°C) to avoid cracks. Use E50-series welding rods to match Q345's strength-this ensures welds are as strong as the base metal. On-site welding is straightforward, even for large structures. Our team provides welding parameters to help achieve optimal results, making Q345 easy to integrate into projects.

Set 2

Q: Which is cheaper: S235jr or Q235?
A: Q235 is typically 10-20% cheaper than S235jr for the same-size H beams. Q235 is a Chinese GB-standard steel with abundant domestic supply, lowering production and logistics costs. S235jr (EN standard) often involves stricter manufacturing requirements (e.g., mandatory impact testing) and may include import costs in non-European regions. For example, a 150×150mm Q235 beam costs ~$480/ton, while S235jr is ~$550/ton. Q235 suits budget-sensitive projects with no EN-standard mandates. S235jr's extra cost is justified for European projects or those needing better toughness. We can provide detailed quotes based on your order size to compare.

Q: What's the load capacity of Ss400 200×200 beams?
A: The load capacity of Ss400 200×200 H beams depends on thickness and span. A common 200×200×8×12mm model (37.3kg/m) with a 6m span supports ~18-22 tons of uniform load. At 8m, capacity drops to 10-14 tons. Ss400's 235 MPa yield strength ensures it resists bending under these loads. The 8mm web handles shear forces, while 12mm flanges bear bending stress. It's ideal for medium-load uses: mezzanines, warehouse racks, or small bridge girders. For precise calculations, we need your project's span, support type (fixed/simple), and load type (uniform/moving). Our engineers can provide custom capacity data.

Q: Can A36 beams be cut to custom lengths?
A: Yes, A36 H beams are easily cut to custom lengths. A36's low carbon content (max 0.25%) makes it compatible with plasma, flame, or shear cutting. We offer cuts from 3m to 12m, with tolerances within ±2mm to fit your drawings. Standard stock lengths are 6m, 9m, 12m, but custom cuts add just 1-2 working days. After cutting, we remove burrs for safe handling and installation. Whether you need 5.5m for a mezzanine or 10m for a frame, we accommodate. Just specify the length when ordering-no extra fees for standard custom cuts on stock beams.

Q: Is Q345 better than Ss400 for high-rises?
A: Yes, Q345 is better than Ss400 for high-rise construction. Q345's 345 MPa yield strength is 47% higher than Ss400's 235 MPa, enabling it to bear heavier vertical loads and resist wind/seismic forces. High-rises need components that minimize structural weight-Q345 allows smaller beam sections than Ss400 for the same load, saving space and cost. Its toughness ensures stability during earthquakes, critical for tall buildings. Ss400 works for low-rises, but Q345 is the industry standard for 15+ story structures. Many high-rise projects specify Q345 for core walls, columns, and beam-column connections.

Q: Do S235jr beams meet EN standards?
A: Yes, S235jr H beams fully comply with European EN 10025-2 standards. We source them from EN-certified mills that adhere to strict requirements: 235 MPa minimum yield strength, 360-510 MPa tensile strength, and room-temperature impact energy ≥27 J. Each batch undergoes tests for chemical composition (carbon ≤0.20%, manganese ≤1.40%) and mechanical properties. We provide mill test certificates (MTCs) with every order, detailing test results and EN compliance. For European projects or those requiring EN materials, S235jr is fully qualified. We can also arrange third-party audits (e.g., SGS) to verify compliance if needed.

Set 3

Q: What's the difference between S235jr and Ss400?
A: S235jr and Ss400 follow different standards and have distinct regional uses. S235jr complies with European EN 10025-2, with 235 MPa yield strength and mandatory room-temperature impact resistance. Ss400 adheres to Japanese JIS G3101, also 235 MPa yield but with a focus on processability. S235jr excels in outdoor or impact-prone European projects; Ss400 is preferred in Asian construction for its ease of cutting/bending. Chemically, S235jr has stricter sulfur limits, improving toughness. Ss400 has slightly higher tensile strength (400-510 MPa vs. 360-510 MPa). Choose based on regional standards-EN for S235jr, JIS for Ss400.

Q: Can Q235 beams be used for concrete composite structures?
A: Yes, Q235 H beams are ideal for concrete composite structures. Q235's good weldability lets you attach shear connectors (studs) easily, which bond steel and concrete. Its 235 MPa yield strength complements concrete's compressive strength, creating a durable load-bearing system. The rough hot-rolled surface enhances concrete adhesion, preventing slippage. Composite structures with Q235 are used in floor slabs, parking garages, and industrial platforms. Q235's cost-effectiveness makes these systems more affordable than using high-strength steel. Many contractors prefer Q235 for composite designs due to its performance and budget fit.

Q: What sizes are available for A36 H beams?
A: A36 H beams come in a wide range of sizes to fit diverse projects. Small sections include 100×100×6×8mm (17.2kg/m) and 125×125×6×9mm (19.8kg/m) for light frames. Medium sizes like 150×150×7×10mm (26.1kg/m) and 200×200×8×12mm (37.3kg/m) work for mezzanines and workshops. Large sections such as 300×300×10×15mm (85.1kg/m) and 400×400×13×21mm (141kg/m) suit bridges and heavy industry. Standard lengths are 6m, 9m, 12m, with custom cuts available. We stock common sizes for quick delivery and can produce custom dimensions for large orders. Our size chart includes weight, flange/web thickness, and load capacity data.

Q: Is Ss400 corrosion-resistant?
A: Ss400 has basic corrosion resistance but needs protection for harsh environments. Its hot-rolled mill scale offers temporary rust protection during storage/transport but wears off. In dry indoor spaces (e.g., warehouse frames), no treatment is needed. For outdoor, humid, or coastal areas, apply galvanizing, painting, or epoxy coating. Galvanizing adds a zinc layer, extending lifespan by 10-15 years. Anti-corrosive paint is cost-effective for mild moisture. Ss400's surface accepts treatments well after sandblasting to remove mill scale. We offer pre-treated Ss400 beams or raw stock for on-site finishing. With proper protection, it performs reliably in corrosive conditions.

Q: What's the lead time for Q345 beams?
A: Lead time for Q345 H beams depends on quantity and size. Stock sizes (150×150mm, 200×200mm) in small batches (≤50 tons) ship in 7-10 working days. Large orders (≥100 tons) or custom sizes take 12-15 days for hot rolling. Adding services like cutting or galvanizing adds 2-3 days. Rush orders (≤30 tons) can be fulfilled in 5-7 days with priority production. We maintain inventory of common Q345 sizes to shorten lead times. After you confirm specs, we provide a precise timeline and send production updates. International shipping adds 2-4 weeks depending on destination, but stock beams are ready to load quickly.

Set 4

Q: Which grade is best for workshop frames?
A: The best grade for workshop frames depends on load and budget-Q235, Ss400, or A36 work for most cases. Q235 is cheapest, with good weldability for light to medium workshops (≤5-ton cranes). Ss400 offers similar strength to Q235 and better processability, ideal for workshops needing frequent modifications. A36 is preferred for North American workshops, meeting ASTM standards with slightly higher strength. For heavy workshops (≥10-ton cranes), upgrade to Q345 for its 345 MPa yield strength. All grades are hot-rolled for toughness, handling workshop equipment loads. Q235/Ss400/A36 are cost-effective; Q345 for heavy duty.

Q: Can S235jr beams be bent into curves?
A: Yes, S235jr H beams can be bent into curves with professional equipment. S235jr's good ductility (elongation ≥26%) allows bending without cracking. We use hydraulic bending machines that apply gradual pressure to avoid stress fractures. The maximum bend angle depends on thickness-thinner webs (≤8mm) bend to 90°, thicker ones need larger radii. For tight bends, mild preheating (100-150°C) improves flexibility. We test sample bends first to meet your specs. Curved S235jr beams are used in architectural designs (arches) or industrial frames. The process adds 2-3 days to lead time, and we ensure dimensional accuracy for easy installation.

Q: What's the weight per meter of Q235 150×150 beams?
A: Weight per meter of Q235 150×150 H beams varies by flange/web thickness. A common 150×150×7×10mm model weighs ~26.1kg/m. A thicker 150×150×9×12mm version is ~32.6kg/m. Weight depends on cross-sectional area-thicker flanges (top/bottom) and web (middle) add mass and strength. Q235's density (7.85g/cm³) is the same as other carbon steels, so weight correlates directly to load capacity. The 26.1kg/m model supports ~12 tons at 6m span; the 32.6kg/m model handles ~16 tons. We provide a weight chart for all Q235 sizes, helping with logistics planning and cost estimation. Just specify the thickness for exact weight.

Q: Are A36 and Q235 interchangeable?
A: A36 and Q235 are often interchangeable for general projects, but with slight strength differences. A36 has 250 MPa yield strength, Q235 235 MPa-A36 handles 6% more load. Both have excellent weldability and formability, working with the same welding methods. A36 is ASTM-standard (North America), Q235 GB-standard (China), but their performance overlaps. For projects with no strict regional standards, they replace each other. However, if specs require ASTM/GB explicitly (e.g., government projects), use the matching grade. We provide test reports to confirm equivalence, so they're interchangeable in most workshops, frames, or small structures.

Q: Do Q345 beams come with quality certificates?
A: Yes, all Q345 H beams include comprehensive quality certificates. Each batch has a mill test certificate (MTC) complying with GB/T 1591 standards, detailing chemical composition (manganese 1.00-1.60%, silicon 0.20-0.55%) and mechanical properties (yield ≥345 MPa, tensile 470-630 MPa). The MTC includes impact test results (for Q345B/C grades) and dimensional tolerances. For international projects, we provide English certificates and can comply with ASTM/EN standards if needed. We also offer third-party testing (e.g., BV, TÜV) upon request. The certificates ensure Q345 meets your project's quality requirements, whether for domestic construction or global infrastructure.

Set 5

Q: What projects use S235jr H beams?
A: S235jr beams are widely used in European and EN-standard projects. They're common in commercial buildings (retail stores, office complexes) for frames and mezzanines. Industrial applications include light workshop structures and equipment supports. Infrastructure uses range from pedestrian bridges to highway noise barriers, leveraging their toughness. Residential construction employs them for steel-framed homes and extensions. S235jr is also used in agricultural buildings (barns, silos) due to its affordability. Its EN compliance makes it mandatory for many European public projects, and its versatility fits both small and large-scale builds.

 

H beam

H beam

H beam