S235jr S355jr Ipe /Heb H Beam Carbon Universal Steel H Beam Price for Steel Structure

H-shaped steel is an economical and efficient section with more optimized section area distribution and a more reasonable strength-weight ratio. It is named because its section is the same as the English letter "H". Since all parts of the H-beam are arranged at right angles, the H-beam has been widely used for its advantages of strong bending resistance, simple construction, cost-saving, and light structural weight in all directions. Its characteristics are as follows:

1. Wide flange and large lateral stiffness.

2. Strong bending resistance, about 5% - 10% higher than I-beam.

3. The two surfaces of the flange are parallel to each other, making the connection, processing, and installation simple.

4. Compared with welded I-beam, it has the advantages of low cost, high accuracy, low residual stress, no need for expensive welding materials and weld detection, and can save about 30% of steel structure manufacturing cost.

5. Under the same section load, the weight of the hot-rolled H steel structure is 15% - 20% less than that of the traditional steel structure.

6. Compared with the concrete structure, the hot-rolled H steel structure can increase the service area by 6%, while the dead weight of the structure can be reduced by 20% - 30%, reducing the design internal force of
the structure.

7. H-shaped steel can be processed into T-shaped steel and honeycomb beams can be combined to form various cross sections, which greatly meet the requirements of engineering design and production.