Product Description
H-shaped steel is an economical cross-section high-efficiency section with more optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter "H". Since all parts of the H-shaped steel are arranged at right angles, the H-shaped steel has the advantages of strong bending resistance in all directions, simple construction, cost saving and light structural weight, and has been widely used.
Product Name | H Beam & I Beam |
Grade | Q195,Q215,Q235,Q345,16Mn,ASTMA36,ASTMA572,SS400,SS490,A36,S235JR,S355JR,ST37,ST52,etc |
Standard | AISI, ASTM, BS, DIN, GB, JIS, EN, GOST,etc |
Flange Thickness | 7-24mmmm |
Flange Width | 50-300mm |
Web Thickness | 5-13mm |
Web Width | 100-700mm |
Length | 5.8m,6m,9m,11.8m,12m or as your requirement |
Surface | Perforated/galvanized/black/Paint |
Technique | Hot-rolled and High frequency welded |
Application | 1.Industrial structure of the steel structure bearing bracket |
Packing | In bulk or container,Standard seaworthy packing or as your required |
Delivery Time | Within 7days |
1.What is a steel H-beam?
An h-beam is a steel structure that looks like its name suggests it should look: It's a steel beam shaped like a capital H. This structural beam made from rolled steel provides an impressive amount of strength when used in commercial building projects. Most of today's steel buildings use H-beams.
2.What is type H steel?
"H" grades are high carbon stainless steel grades, having improved strength at high temperatures - generally above 500°C. These high carbon grades have high short-term and long-term creep strength. They are usually produced in the form of pipe and plate.
3.Is H or I-beam better?
If you need a beam that is strong and rigid, then an H-beam may be the better choice. If you need a beam that is lighter and more flexible, then an I-beam may be the better choice. Ultimately, it is up to you to decide which type of beam is best for your project.
4.Is there an H-beam?
H shapes are the largest and heaviest beams available and can tolerate larger weight loads. They are sometimes called HP, H-Piles, or bearing piles, which stems from their use in underground foundation support (load bearing columns) for skyscrapers and other large buildings.
5.Why are H-beams used?
An H Beam is a steel structure shaped like the letter "H." It is commonly used in construction to support heavy loads and strengthen buildings. This beam has wide flanges and a uniform design, making it suitable for homes, bridges, and industrial projects.