S355J2 is one of the most commonly used high-strength, non-alloy structural steels in construction and engineering projects. Produced according to EN 10025-2:2004, it offers a minimum yield strength of 355 MPa, excellent tensile strength, and reliable performance across a wide range of structural applications. Its combination of high strength, ductility, and weldability makes it ideal for engineering, construction, and industrial frameworks.

Specification of S355J2 Channel Steel Bar
Standard: EN 10025-2
Length: 6–12 m
Thickness: 3.8–12.5 mm
Cross-Section Dimensions: 150 × 75 mm
Chemical Composition of S355J2 Steel (Max %)
| Grade | C | Si | Mn | P | S | Cu |
|---|---|---|---|---|---|---|
| S355J2 | 0.24 | 0.60 | 1.70 | 0.035 | 0.035 | 0.60 |
Controlled chemical composition ensures high yield strength, good ductility, and weldability.
Mechanical Properties of S355J2 Channel Steel
Yield Strength (ReH) – Minimum
| Nominal Thickness (mm) | <16 | 16–40 | 40–63 | 63–80 | 80–100 | 100–150 | 150–200 | 200–250 | 250–400 |
|---|---|---|---|---|---|---|---|---|---|
| ReH (MPa) Min | 355 | 345 | 335 | 325 | 315 | 295 | 285 | 275 | 265 |
Tensile Strength (Rm)
| Nominal Thickness (mm) | <3 | 3–100 | 100–150 | 150–250 | 250–400 |
|---|---|---|---|---|---|
| Rm (MPa) | 510–680 | 470–630 | 450–600 | 450–600 | 450–600 |
Elongation (A%) – Minimum, Lo = 5,65√So
| Nominal Thickness (mm) | 3–40 | 40–63 | 63–100 | 100–150 | 150–250 | 250–400 |
|---|---|---|---|---|---|---|
| A (%) | 22 | 21 | 20 | 18 | 17 | - |
These mechanical properties make S355J2 channel steel highly suitable for structural and load-bearing applications, including construction frameworks, bridges, industrial machinery, and heavy equipment support structures.

Q1: What is S355J2 channel steel?
A:
S355J2 is a low-alloy, hot-rolled structural steel produced according to EN 10025-2. It has a minimum yield strength of 355 MPa and is specifically designed for applications requiring good low-temperature toughness.
Q2: What standard does S355J2 comply with?
A:
S355J2 complies with EN 10025-2:2004, which specifies technical delivery conditions for non-alloy structural steels. The standard ensures consistent mechanical properties, chemical composition, and quality across different production batches.
Q3: What are the typical mechanical properties of S355J2 channel steel?
A:
Yield strength: ≥ 355 MPa
Tensile strength: 470–630 MPa
Elongation: ≥ 20% (depending on section size)
These properties provide a balance of strength, ductility, and toughness, especially for low-temperature environments.
Q4: Does S355J2 require impact testing?
A:
Yes. S355J2 is impact tested at -20°C, ensuring reliable toughness and reducing the risk of brittle fracture in cold climates or low-temperature service conditions.
Q5: How does S355J2 differ from S355JR channel steel?
A:
The main difference is low-temperature performance:
S355JR: Impact tested at 20°C, suitable for normal temperature applications.
S355J2: Impact tested at -20°C, suitable for cold environments.
Other properties like yield strength and tensile strength are similar.
Q6: Is S355J2 channel steel weldable?
A:
Yes. S355J2 has good weldability due to its controlled carbon and alloy content. Preheating may be required for thicker plates or channels to prevent residual stress and cracking, especially in low-temperature conditions.
Q7: What are the typical applications of S355J2 channel steel?
A:
Cold-weather structural frameworks for buildings and bridges
Offshore and marine constructions
Machinery bases and support structures
General fabrication in low-temperature environments
Q8: What size range is available for S355J2 channel steel?
A:
S355J2 channels are commonly available in heights from 80 mm to 300 mm and thicknesses from 5 mm to 20 mm, depending on the manufacturer. Custom lengths and cutting services are usually available.
Q9: Can S355J2 channel steel be cut or machined?
A:
Yes. S355J2 can be flame cut, sawed, drilled, or milled using standard equipment. Proper cutting parameters should be followed for thicker sections to maintain mechanical properties.
Q10: What inspection and certification are supplied with S355J2 channel steel?
A:
Material is generally supplied with EN 10204 3.1 or 3.2 mill test certificates, covering chemical composition, mechanical properties, and dimensional verification. Additional testing such as ultrasonic or magnetic particle inspection can be provided for critical applications.



















