In lattice structures, the bending strength in the length direction of steel sheet piles is not the main factor, but the transverse locking tensile strength of the sheet piles should be considered. Therefore, straight web sheet piles, also known as I-shaped sheet piles, are usually used for the lattice.
The allowable deviation angle between grid sheet piles is generally 10 °. The length of sheet piles produced in various countries is usually within 25m. For high grid piles, they need to be spliced and lengthened during construction.
Steel sheet piles can be reused 3-4 times, and the locking strength of used sheet piles may decrease. It needs to be re determined through testing, and new sheet piles should be used for high head grid cofferdams.
Special connection piles need to be used at the intersection of the grid shaped cofferdam grid body sheet pile walls. There are three types of connection pile types: T-shaped, Y-shaped, and cross shaped. They are usually riveted or welded from standard straight web sheet piles. The quality of welded connection piles is generally not easy to ensure, and should be strictly controlled during stone manufacturing. For high and medium grid bodies, riveted piles should be selected.

The application of steel sheet piles runs through and extends to the entire construction industry, from the use of traditional hydraulic engineering and civil processes, as well as the application through railways and tram tracks, to the control of environmental pollution.
The practical value of steel sheet piles has been reflected in the innovative production of many new products, such as some special welded buildings; Metal plates made by hydraulic vibration pile drivers; Sealing and bonding of water gates and treatment of factory coatings. Many factors ensure that steel sheet piles maintain one of the most useful manufacturing component elements, which is not only beneficial for the excellence of steel quality, but also for the investigation and development of the steel sheet pile market; Beneficial for optimizing the design of product features to better meet user needs.
The development of specialized sealing and printing processes is a good example in this regard. For example, the HOESCH patent system, a commonly used model of steel sheet pile, has opened up an important new field for steel sheet piles in controlling pollution.



















