The Detail of ASTM A283 tensile strength carbon steel plate

Oct 24, 2025

Leave a message

Products Description

 

ASTM A283 structural carbon steel plate is a low- to intermediate-strength steel material designed for general structural applications. It is a low carbon, weldable, and formable steel with consistent performance and excellent fabrication properties.


This specification includes four common grades - A, B, C, and D - each representing different mechanical strength levels within the same material family.

info-449-449

 

This specification covers four grades of carbon structural steel plates intended for general fabrication and construction use.
The steel is produced through open-hearth, basic-oxygen, or electric furnace processes.


To ensure quality, chemical composition and mechanical testing are required. The analysis must confirm compliance with the standard ranges of carbon (C), manganese (Mn), phosphorus (P), sulfur (S), silicon (Si), and copper (Cu) when specified.

 

Each plate undergoes tensile and yield strength testing to verify strength, ductility, and elongation performance, ensuring reliable structural integrity.

 

Chemical Composition

 

Elements Grade A Grade B Grade C Grade D
Carbon (max) 0.14 0.17 0.24 0.27
Manganese (max) 0.90 0.90 0.90 0.90
Phosphorus (max) 0.035 0.035 0.035 0.035
Sulfur (max) 0.04 0.04 0.04 0.04
Silicon (Plates ≤1½ in) 0.40 (max) 0.40 (max) 0.40 (max) 0.40 (max)
Silicon (Plates >1½ in) 0.15–0.40 0.15–0.40 0.15–0.40 0.15–0.40
Copper (when specified) 0.20 (min) 0.20 (min) 0.20 (min) 0.20 (min)

 

ASTM A283 Mechanical Properties

 

Properties Grade A Grade B Grade C Grade D
Tensile Strength 45,000–60,000 psi (310–415 MPa) 50,000–65,000 psi (345–450 MPa) 55,000–75,000 psi (380–515 MPa) 60,000–80,000 psi (415–550 MPa)
Yield Point (min) 24,000 psi (165 MPa) 27,000 psi (185 MPa) 30,000 psi (205 MPa) 33,000 psi (230 MPa)
Elongation in 8" 27% min 25% min 22% min 20% min
Elongation in 2" 38% min 28% min 25% min 23% min

 

Application

 

ASTM A283 mild steel plates are ideal for structural and general engineering applications, such as:

Building frames and support structures

Storage tanks and pressure vessels (under moderate pressure)

Low-load bridges and welded assemblies

Industrial equipment, pipes, and enclosures

Fabrication of bolts, rivets, and fasteners

 

.

ASTM A283 Grade C vs ASTM A36 Steel Plate

 

Both A283 Grade C and A36 carbon steel plates are designed for structural applications, but they differ in strength and intended use.

 

ASTM A283 Gr. C covers low to intermediate tensile strength carbon steel, suited for light-duty structures and general fabrication.

ASTM A36 steel provides higher yield strength, often used in bridges, building frames, and heavy construction involving riveted, bolted, or welded joints.

 

In essence, A283C is a cost-efficient, lighter structural steel, while A36 is a higher-strength, heavy-duty material.

 

info-536-393