Comparison of Q235 vs Q345 Steel
| Property | Q235 | Q345 | Notes |
|---|---|---|---|
| Steel Type | Carbon structural steel | Low-alloy structural steel | Q345 contains alloying elements such as Mn, Si, Cu, Ni, Cr, Nb |
| Yield Strength (Lower Limit) | 235 MPa | 345 MPa | "Q" stands for "yield" in Chinese; the number is the minimum yield strength |
| Tensile Strength | 370–500 MPa | 470–630 MPa | Q345 has higher tensile strength due to alloying |
| Carbon Content | 0.12–0.22 % | 0.12–0.20 % | Slightly lower in Q345 for better weldability |
| Alloying Elements | Minimal | Mn, Si, Cu, Ni, Cr, Nb, V, etc. | Improves strength, low-temperature toughness, and fatigue resistance |
| Plasticity & Toughness | Moderate | High | Q345 suitable for dynamic load conditions |
| Weldability | Good | Excellent | Q345's alloying elements require careful welding but allow better performance in structures |
| Temperature Resistance | Standard | Low-temperature capable (-40 °C) | Q345 suitable for cold regions and structures subject to dynamic loads |
| Corrosion Resistance | Moderate | Moderate to good (depending on alloy) | Q345 can be further treated for enhanced corrosion resistance |
Typical Applications
| Q235 | Q345 |
|---|---|
| Metal structural parts with low core strength requirements | Medium & low pressure vessels |
| Carburized or cyanide-treated parts | Oil tanks and fuel storage |
| Tie rods, connecting rods, hooks, couplers | Vehicles, cranes, mining machinery |
| Bolts, nuts, sleeves, shafts, welded components | Power stations, bridges, and dynamic-load-bearing structures |
| General steel constructions | Building structures, industrial structures in cold climates |
Q235: Economical carbon steel with moderate mechanical properties. Best for general structural components, low-strength mechanical parts, and welded assemblies where high strength or cold-resistance is not critical.
Q345: High-performance low-alloy steel, ideal for load-bearing structures, vehicles, cranes, pressure vessels, and cold-climate applications. It offers higher strength, better toughness, and excellent low-temperature performance.



















