1. How Wear-Resistant Plate Is Made
Wear-resistant plate starts as a low-alloy steel that is quenched and tempered to reach a high, uniform hardness through the thickness. The hardening gives a hard martensitic structure that resists abrasion while keeping enough toughness for the part not to crack on impact. The plate is produced with tight flatness and thickness tolerance so that fabricated parts fit together in service.
2. The NM and AR Grade Families
NM grades follow the Chinese naming system, where NM stands for wear-resistant steel and the number is the Brinell hardness in HBW, such as NM400, NM450, NM500 and NM550. AR grades follow the European system with the same hardness numbers, AR400, AR450, AR500 and AR550. For the same hardness number, NM and AR plates are close in chemistry and performance and are often interchangeable in design.
3. Selecting the Right Hardness
Lower hardness grades such as NM400 and AR400 are used where parts must also be formed and welded, such as hoppers, chutes and liners. NM450 and AR450 give a good balance between wear life and fabricability for buckets and crusher parts. NM500, AR500, NM550 and AR550 are reserved for the most abrasive applications such as shovel buckets, screen decks and wear strips, where bending must be limited.
4. Fabrication and Welding
Wear plates are cut by plasma or laser, drilled with carbide tools, and formed with generous radii to avoid cracking in the hard material. Welding uses low-hydrogen consumables with controlled heat input and preheat, and the weld area is often the first place to wear unless protected by a hard-facing overlay. Flame cutting edges should be ground smooth before the part enters service.
5. Applications in Manufacturing and Mining
Typical parts include dump truck liners, loader buckets, crusher liners, conveyor chutes, hoppers, wear strips and cutting edges in mining, cement, steel and recycling plants. In industrial manufacturing, the plate is used for dies, wear shoes and machine frames that see constant friction. Ordering with a mill certificate stating hardness and impact values ensures the plate meets the drawing requirements.



















