What are the production standards for hot - rolled alloy steel round bars like 12Cr1MoV?​

Aug 07, 2025

Leave a message

 

Hot - rolled 12Cr1MoV alloy steel round bars begin with the melting of appropriate raw materials. This typically occurs in an electric arc furnace or a similar high - temperature melting process. The raw materials are carefully selected to ensure they contain the correct proportions of elements. In the case of 12Cr1MoV, these elements include chromium (0.9 - 1.2%), molybdenum (0.25 - 0.35%), and vanadium (0.15 - 0.30%), along with carbon (0.08 - 0.15%) and other elements. The precise control of these chemical compositions is crucial as they determine the final properties of the round bars.

Once the molten steel is obtained, it is cast into billets. These billets are then reheated to a suitable temperature, typically above 1000°C. This high temperature makes the steel malleable, allowing it to be easily shaped. After reheating, the billets are passed through a series of rolling mills. The rolling mills gradually reduce the cross - section of the billets and form them into the desired round shape. The number of passes through the rolling mills and the specific design of the mills are carefully controlled to achieve the correct dimensions and surface finish.

The production standard for 12Cr1MoV places great emphasis on mechanical properties. The tensile strength of the round bars should be at least 490 MPa, which indicates its ability to withstand pulling forces without breaking. The yield strength should be at least 245 MPa, representing the point at which the steel starts to deform plastically. Non - destructive testing methods, such as ultrasonic and radiographic testing, are often carried out. Ultrasonic testing uses high - frequency sound waves to detect internal defects within the round bars. Radiographic testing involves using X - rays or gamma rays to create an image of the internal structure of the bars, allowing for the identification of any flaws.

Heat treatment after rolling is also an important part of the production process. Processes like normalizing and tempering are carefully controlled. Normalizing helps to refine the grain structure of the steel, improving its mechanical properties. Tempering is then used to reduce the internal stresses created during the quenching process and to adjust the hardness and toughness of the steel. These heat - treatment processes are crucial for achieving the desired microstructure and mechanical properties suitable for applications in power plants, such as in high - temperature and high - pressure pipelines. In power plants, these round bars need to withstand extreme conditions, and the proper production standards ensure their reliability and safety.