As a professional steel beam factory with over 20 years of production experience, GNEE specializes in supplying ASTM A572 Grade 50 H steel beams for bridges, buildings, and heavy-duty structures.

ASTM A572 Grade 50 H steel beams
Within the first 100 words, it's critical to clarify who we are. GNEE is a direct manufacturer, not a distributor. We offer A572 Gr 50 H steel beams with stable mechanical properties, tight dimensional tolerances, and full mill test certification, helping customers achieve higher strength per unit weight while reducing overall steel consumption.
What Is A572 Gr 50 H Steel Beams?
A572 Gr 50 H steel beams are produced from ASTM A572 Grade 50 high-strength low-alloy (HSLA) steel.
Grade 50 is a columbium-vanadium alloy steel designed to deliver higher yield strength compared to ordinary carbon steel.
Key characteristics include:
Minimum yield strength of 50,000 PSI (345 MPa)
Excellent strength-to-weight ratio
Good atmospheric corrosion resistance
Suitable for riveted, bolted, and welded structures
Because less material is required to meet the same strength requirement, A572 Gr 50 H steel beams are widely used in large-span and load-critical projects.
Chemical Composition of A572 Gr 50 H Steel Beams
The enhanced performance of A572 Gr 50 H steel beams comes from controlled alloying elements that refine grain size and improve toughness.
| Element | C (%) max | Mn (%) | Si (%) max | P (%) max | S (%) max |
|---|---|---|---|---|---|
| A572 Gr 50 | 0.23 | ≤ 1.35 | ≤ 0.40 | 0.04 | 0.05 |
Compared with plain carbon steel, the higher alloy content improves strength and corrosion resistance, while still maintaining good weldability.
Mechanical Properties of A572 Gr 50 H Steel Beams
| Property | Value |
|---|---|
| Yield Strength | ≥ 345 MPa (50 ksi) |
| Tensile Strength | ≥ 450 MPa (65 ksi) |
| Elongation (8 in / 200 mm) | ≥ 16% |
| Elongation (2 in / 50 mm) | ≥ 21% |
These properties make A572 Gr 50 H steel beams suitable for dynamic load conditions and heavy structural applications.
Machinability, Weldability & Heat Treatment of A572 Gr 50 H Beams
Machinability & Weldability
Machinability rating: approximately 66% of B1112
Average cutting speed: 110 ft/min
Easily welded using all standard commercial welding methods
Heat Treatment
Typically supplied in the as-rolled condition
Annealing (if required): 1700°F, followed by slow furnace cooling
Although Grade 50 is more difficult to cold work than plain carbon steel, it can still be bent or shaped successfully with increased forming force.
Dimensional Tolerances of A572 Gr 50 H Steel Beams
ASTM A572 Grade 50 is known for consistent dimensional control, but due to hot rolling characteristics, final thickness may vary within specified tolerances.
Thickness tolerance (example):
3/4" × 52" wide plate: tolerance range 0.740" – 0.780"
Under-specified thickness tolerance: 0.010"
Because of thickness, flatness, and camber variations, A572 Gr 50 H steel beams are generally not finished to exact nominal thickness, which is normal for hot rolled structural products.
Applications of A572 Gr 50 H Steel Beams
Thanks to its high strength and excellent fabrication performance, A572 Gr 50 H steel beams are considered a true "workhorse" material.
Typical applications include:
- Bridges and highway structures
- Commercial and industrial buildings
- Heavy construction equipment frames
- Truck frames and trailer structures
- Transmission towers and poles
- Conveyors, booms, and structural supports
Steel mills commonly produce channels and heavy beams using Grade 50 due to its versatility.
For projects requiring high strength per unit weight, A572 Gr 50 H steel beams are a proven and economical solution. As a professional manufacturer, GNEE delivers consistent quality, competitive pricing, and technical support you can rely on.
Contact us for the latest A572 Gr 50 H steel beams price list and stock availability.

Application
What is ASTM A572 GR 50 standard?
ASTM A572 GR 50 is a high strength low alloy steel. Grade 50 is difficult to form since it contains more alloying elements than plain steel but offers more strength per unit of weight. Owing to its high strength ASTM A572 Grade 50 Plates requires less material to satisfy strength requirements than plain carbon steel.
What is the difference between A36 and A572 Gr50?
A572 Gr50 has a higher minimum requirement, ensuring more consistent high-end performance. A36 is cheaper per pound, but A572 Gr50's strength may mean you need less material, potentially reducing overall project cost. Both are easily welded, but A36 is slightly more forgiving for general fabrication
What is the difference between 4140 and A572 grade 50 steel?
A572 is a hot-rolled carbon steel that is used where a high strength to weight ratio is desired. A grade such as AISI 4140 offers decent corrosion resistance due to higher chromium and molybdenum content and is commonly used in firearm parts, pressurized gas tubes, and structural tubing for roll cages
Can you weld A36 to A572?
Weldability of the two steels is the same. Welds on the two steels (A36 and A36/A572 Gr 50 dual grade) using identical electrodes nuxcs and weld- ing parameters produced acceptable, ~quivalent welded JOints.
What is the ultimate strength of A572 grade 50 steel?
ANSWER: ASTM 572 Grade 50 steel has an ultimate tensile strength of 450 MPa (metric) and 65,300 PSI (Imperial). It has a tensile yield strength of 345 MPa and 50,000 PSI.



















