Gnee Steel Group successfully supplied 1,600 tons of S275J0 H-Beam to a major construction contractor in the Philippines. The products were purchased for a workshop construction project, demonstrating Gnee's ability to provide large-volume structural steel supplies for international engineering projects.
The customer specializes in building construction, including various above-ground and underground construction projects. As an experienced project contractor, the customer places considerable importance on structural steel quality, product specifications, and reliable material supply.
Our cooperation with this customer began in 2015. Over the years, Gnee has earned the customer's trust through consistent product quality and professional service. The customer places repeat orders every month, establishing a long-term and stable business relationship with Gnee.
Project Information
| Item | Details 具体信息 |
|---|---|
| Product | S275J0 H-Beam |
| Steel Grade | S275J0 |
| Total Quantity | 1,600 Tons |
| Destination | Philippines |
| Application | Workshop Construction |
| Product Standard | EN 10025-2:2019 |
| Delivery Condition | Hot Rolled |
| Inspection Certificate | EN 10204 Type 3.2 |
What Is S275J0 H-Beam? Understanding Its Grade and Characteristics
S275J0 H-Beam is a hot-rolled structural steel section manufactured according to the European standard EN 10025-2. It belongs to the non-alloy structural steel category and is commonly used in industrial buildings, steel workshops, warehouses, and other load-bearing structures.
Compared with structural steel grades without the same impact toughness classification, S275J0 provides a defined impact performance requirement at 0°C. This makes it an option for engineering projects where strength and low-temperature impact properties are both considered.
S275J0 H-Beam Chemical Composition and Mechanical Properties
When purchasing S275J0 H-Beam, chemical composition and mechanical properties are two essential factors for evaluating material quality. They influence the steel's strength, toughness, weldability, and suitability for different structural applications.
1 Chemical Composition of S275J0 (%)
| Chemical Element | Maximum Content(%) |
|---|---|
| Carbon (C) | 0.18 |
| Silicon (Si) | Not specified in the table |
| Manganese (Mn) | 1.50 |
| Phosphorus (P) | 0.030 |
| Sulfur (S) | 0.030 |
| Nitrogen (N) | 0.012 |
| Copper (Cu) | 0.55 |
2 Mechanical Properties of S275J0
| Mechanical Property | Nominal Thickness | Standard Requirement |
|---|---|---|
| Yield Strength | ≤16 mm | ≥275 MPa |
| Yield Strength | >16–40 mm | ≥265 MPa |
| Yield Strength | >40–63 mm | ≥255 MPa |
| Yield Strength | >63–80 mm | ≥245 MPa |
| Yield Strength | >80–100 mm | ≥235 MPa |
| Yield Strength | >100–150 mm | ≥225 MPa |
| Tensile Strength | 3–100 mm | 410–560 MPa |
| Tensile Strength | >100–150 mm | 400–540 MPa |
| Impact Energy | At 0°C | ≥27 J |
The minimum yield strength of S275J0 decreases as the nominal product thickness increases. Therefore, when selecting an S275J0 H-Beam, buyers should consider the actual web and flange thicknesses rather than relying only on the steel grade designation.
S275J0 H-Beam Sizes and Specifications in the Philippines Project
Choosing the right S275J0 H-Beam requires more than selecting the steel grade. Section height, flange width, web thickness, flange thickness, and unit weight are also important factors.
| Product Specification | Thickness Marking in Certificate |
|---|---|
| HE200A | 10 mm |
| HE260A | 12.5 mm |
| HE500B | 29 mm |
| HE600A | 25 mm |
| HE450P | 14.6 mm |
| HE450B | 26 mm |
| HE300P | 10.7 mm |
| Additional Section | 8.5 mm |
Why Is S275J0 H-Beam Suitable for Workshop Construction?
S275J0 H-Beam is widely considered for industrial workshop construction because of its structural strength, H-shaped cross-section, and suitability for fabrication.
1. Reliable Load-Bearing Performance
S275J0 provides a minimum yield strength of 275 MPa for nominal thicknesses up to 16 mm. Its mechanical properties make it suitable for consideration in industrial building frames and other load-bearing structural applications.
2. Efficient H-Shaped Cross-Section
The H-shaped design provides a practical structural configuration for resisting bending forces. H-beams are therefore commonly used as structural columns, beams, and supporting members in steel buildings.
3. Suitable for Welding and Fabrication
S275J0 is a low-carbon structural steel grade commonly used in welded construction. It can be processed through cutting, drilling, and welding when appropriate procedures are followed. Welding conditions should be determined according to material thickness and project requirements.
4. Multiple Section Options
Different HEA, HEB, and other structural section series provide engineers with various choices for different building loads, spans, and structural configurations.
5. Traceable Material Quality
For large-volume structural steel projects, material traceability and inspection documentation are important. Third-party inspection and EN 10204 Type 3.2 certification can provide additional verification of product conformity.
Third-Party Inspection for S275J0 H-Beam
Quality inspection is an essential part of international structural steel procurement, especially when materials are supplied for large construction projects.
For this 1,600-ton S275J0 H-Beam order, the inspection documentation includes a third-party inspection certificate issued by TÜV SÜD according to EN 10204 Type 3.2.
Main Applications of S275J0 H-Beam
S275J0 H-Beam can be used in various structural engineering applications, particularly where steel sections are required for building frameworks and load-bearing components.
Industrial Workshops and Factories
S275J0 H-Beams can be considered for workshop columns, roof beams, structural frames, and other industrial building components.
Steel Structure Warehouses
H-beams are commonly used in warehouse columns, supporting beams, and roof structures. The appropriate section should be selected according to building dimensions and structural calculations.
Commercial Buildings
Depending on engineering design requirements, S275J0 H-Beams can be used in commercial building frameworks and other structural steel components.
Industrial Equipment Platforms
H-beams can also be used in equipment support frames, industrial platforms, and other load-bearing structures.
8. Gnee S275J0 H-Beam Supply, Processing, and Export Services
As an international steel supplier, Gnee provides structural steel sourcing and export support for construction contractors, steel fabricators, distributors, and engineering companies.
For customers sourcing S275J0 H-Beam, we can arrange the following services according to project requirements and order confirmation:
1. Structural Steel Supply
Supply S275J0 H-Beam and other structural steel sections for industrial buildings, workshops, warehouses, and engineering projects.
2. Customized Specifications and Lengths
Arrange product specifications and customized cutting lengths according to customer drawings and technical requirements.
3. Cutting and Fabrication Services
Provide cutting, drilling, and other agreed fabrication services according to confirmed drawings and processing requirements.
4. Quality Inspection Coordination
Coordinate material inspections, dimensional checks, and third-party inspection services according to the agreed quality requirements.
5. Inspection Documents
Provide relevant material certificates and inspection documentation according to the product standard and order requirements.
6. Export Packaging
Arrange suitable export bundling, protective packaging, product marking, and loading according to the product characteristics and transportation requirements.
7. International Shipping Coordination
Assist customers with export arrangements, shipping coordination, and delivery planning for overseas projects.
For large-volume orders, Gnee can coordinate specifications, inspection requirements, processing arrangements, and shipping schedules to help customers manage their structural steel procurement more efficiently.
Looking for a Reliable S275J0 H-Beam Supplier?
Choosing the right S275J0 H-Beam supplier is important for maintaining material quality, controlling procurement costs, and ensuring smooth project execution.
With experience in international structural steel supply, Gnee has established long-term relationships with customers in different markets. Our 1,600-ton S275J0 H-Beam export project to the Philippines demonstrates our experience in large-volume supply, third-party inspection coordination, and long-term customer cooperation.
Whether you are purchasing S275J0 H-Beam for workshop construction, industrial buildings, warehouses, or other engineering projects, our team can help you find suitable structural steel solutions.
Contact Gnee Today for Your S275J0 H-Beam Quotation!
Send us your required steel grade, H-beam dimensions, quantities, and destination port. Our team will evaluate your requirements and provide a suitable product solution with a competitive quotation.