S355J2 low-alloy (HSLA) steel
Corrosion Resistance
ASTM A36 has moderate corrosion resistance due to its low carbon content. However, it is not recommended for use in marine environments, as it may need to be corrected quickly. S275JR, on the other hand, has better corrosion resistance due to its higher manganese content. It is suitable for use in mildly corrosive environments but not marine environments.
Yield Strength
Another critical difference between ASTM A36 and S275JR steel is the yield strength. Yield strength measures how much stress a material can take before it begins to deform. ASTM A36 steel has a minimum yield strength of 36,000 psi, while S275JR steel has a minimum yield strength of 275 N/mm2.
Tensile Strength
The tensile strength is another essential mechanical property when comparing ASTM A36 and S275JR steel. Tensile strength measures the amount of force required to pull a material apart. ASTM A36 steel has a minimum tensile strength of 58,000 psi, while S275JR steel has a minimum tensile strength of 430 N/mm2.
Density
The density of a material is another important property to consider when comparing ASTM A36 and S275JR steel. The viscosity of both materials is very similar, with only a tiny difference between them. The thickness of ASTM A36 steel is 7,800 kg/m3, while the density of S275JR steel is 7,850 kg/m3.

GNEE Group receives visiting customers

If you have more needs and questions about steel, please contact us!



















