GNEE Group office environment
sheet pile Products Description
Sheet piles are steel plates with interlocking edges (or clasps) that are driven into the ground to provide retaining and excavation support. Sheet piles are usually installed using vibratory hammers, but impact hammers may also be used if the soil is too NM/dense.
Advantages of steel sheet wall construction:
Steel sheet pile construction is very easy to drive into NM soil layer, so high strength is also a big advantage, not only high strength, the waterproof performance of steel sheet piles is also very good; steel sheet pile construction is environmentally friendly, in the construction of the amount of soil extraction and the use of concrete can be greatly reduced, effective protection of land resources; steel sheet pile construction has a strong function of disaster relief and rescue; Steel sheet pile construction will not be restricted or affected by weather conditions; ensure its good adaptability and interchangeability, and can be reused.
metal sheet piling
sheet piles wall Product Details
| Model | Size | Each sheet pile | |||||
| Valid width (mm) |
Valid height (mm) |
Thickness (mm) |
Cross-sectional area cm2 |
Cross-sectional moment cm4 |
Cross-sectional coefficient cm3 |
Unit mass kg/m |
|
| NS-SP-II | 400 | 100 | 10.50 | 61.18 | 1240 | 152 | 48 |
| NS-SP-III | 400 | 125 | 13.00 | 76.42 | 2220 | 223 | 60 |
| NS-SP-IIIA | 400 | 150 | 13.10 | 74.4 | 2790 | 250 | 58.4 |
| NS-SP-IV | 400 | 170 | 15.50 | 96.99 | 4670 | 362 | 76.1 |
| NS-SP-VL | 500 | 200 | 24.30 | 133.8 | 7960 | 520 | 105 |
| NS-SP-VIL | 500 | 225 | 27.60 | 153 | 11400 | 680 | 120 |
| NS-SP-IIw | 600 | 130 | 10.30 | 78.7 | 2110 | 203 | 61.8 |
| NS-SP-IIIw | 600 | 180 | 13.40 | 103.9 | 5220 | 376 | 81.6 |
| NS-SP-IVw | 600 | 210 | 18.00 | 135.3 | 8630 | 539 | 106 |
hot rolled sheet pile
GNEE Group Receives Visiting Customers
We are committed to quality control and customer service. Our staff is always ready to discuss your requirements and ensure complete customer satisfaction. We have introduced a series of equipment to meet the different needs of our customers.
sheet piling
For more product information about the topic Alloys and Steel products, please contact us!