ASTM A36 Mild Steel Structural H Beam
Chemical Composition of A36 Carbon Steel
Carbon: 0.29% maximum
Manganese: 0.80% - 1.20%
Phosphorus: 0.04% maximum
Sulfur: 0.05% maximum
Mechanical Properties of A36 Structural H-Beam
Yield Strength: The minimum yield stress is 36,000 psi (approximately 250 MPa) and represents the point at which the material begins to deform plastically.
Tensile Strength: Typically ranges from 58,000 to 80,000 psi (400-550 MPa) and reflects the maximum tensile (tension or stretching) stress a material can withstand before failure.
Elongation: Approximately 20% at a 2-inch gauge length and shows the material's ductility or ability to stretch under tensile stress before breaking.
Hardness: Typically measured with a Brinell NMness tester and varies depending on the specific heat treatment.
GNEE's A36 Carbon H-Beams are available in a variety of sizes, with specifications based on depth, flange width, web thickness, and flange thickness. Common sizes range from small beams for residential projects to large sections used in heavy construction.
| Model Number |
Q235B/C/D Q345B/C/D/E Q390B/C/D/E Q420B/C/D/E Q460/C/D/E Q500/C/D/E SS400 SM490A/B SN400A/B SN490B S235JR/J0 S275JR/J0/J2 S355JR/J0/J2 S355K2 S450J0 S355M/L S460M S355J0WP/J2WP S355J0W/J2W/K2W |
| Application | Industry/Chemical Equipment |
| Welding Line Type | Welding |
| Processing Service | Bending, Punching, Cutting, Moulding |
| Length | 6000mm 9000mm 12000mm or Customized |
| Technique | Hot Rolled Cold Rolled |
| Payment terms | L/C T/T (30%DEPOSIT) |
| Process method | Standard |
GNEE Steel H Beam Steel Manufacturer
GNEE Steel was established in 2008, our main products are section steel, angle steel, flat steel, wear-resistant steel, etc. We have established long-term cooperative relations with well-known steel mills and are happy to provide you with the best prices and product suggestions. You are welcome to visit our company.
