Why some channels have more burrs

Jan 17, 2024

Leave a message

Why some channels have more burrs


Channel steel is a kind of steel strip with a groove-shaped cross-section. Its specification representation, such as 120 * 53 * 5, that the waist height of 120mm, leg width of 53mm, waist thickness of 5mm channel steel, or 12 # channel steel. Channel steel is mainly used in building structures, vehicle manufacturing and other industrial structures, channel steel is often used in combination with I-beams. Channel steel is divided into ordinary channel steel and light channel steel. Ordinary hot rolled channel steel specification is 5-40#. Supply and demand side supply hot rolled flexible channel steel specification is 6.5-30#. Channel steel is mainly used in building structures, vehicle manufacturing and other industrial structures. Channel steel is usually used together with I-beams. According to the theory of steel structure, the wing plate of channel steel should be stressed, that is to say, the channel steel should be standing, not lying.

China steel channel section Distributors--GNEE Group

First, the slope of the upper and lower shear blade legs is basically the same as the hole pattern of the finished channel steel, so that the legs are basically stressed at the same time during shearing, the shear force is large, and the shear blade wears out quickly. On the one hand, the leg shear indentation is serious, on the other hand, the shear blade aging, it is easy to see the phenomenon of channel steel tear and burr more.


Secondly, compared with the waist, due to the effect of the shear angle, when the edge is worn out, when the leg is sheared, the shear becomes smaller, the leg shear changes from the usual shear to tear, and the end face of the groove leg is prone to burrs.


Third, compared with other parts, the shoulder of the groove steel is thicker, the shear force required is also larger, and the edge is worn out quickly. The edge is used for a period of time. The relative wear of this part is large, resulting in a large shoulder clearance and easy shoulder collapse.

 

If you have more needs and questions about steel, please contact us!

China c shape channel Distributors--GNEE Group

GNEE Group receives visiting customers

 

China channel section in steel Distributors--GNEE Group

 

GNEE Group office environment