Knowledge

In lattice structures, the bending strength in the length direction of steel sheet piles is not the main factor, but the transverse locking tensile st

The pressure on the retaining structure inside and outside the wall caused by excavation of the foundation pit, as well as the settlement and excavati

The imbalance between supply and demand in Xinjiang is facing a changing opportunity: The supply side reform in Xinjiang is expected to accelerate the

When the water depth is large, commonly used walking steel sheet pile support and positioning. When to use steel sheet piles for transportation to the

Most small and medium-sized Larsen steel sheet piles have a relatively short construction time. If the owner does not have internal support materials,

The application of steel sheet piles runs through and extends to the entire construction industry, from the use of traditional hydraulic engineering a

There is no single price per metre for sheet piling, because the cost depends on the section mass per square metre of wall, the steel grade, coating a

According to the normal Larsen steel sheet pile models, there are SP-2 12 meter Larsen steel sheet pile, SP-3 12 meter Larsen steel sheet pile, SP-4 1

The I-shaped steel pile enclosure structure is suitable for cohesive soil, sandy soil, and sand gravel layers with a particle size not exceeding 100mm

There are two main methods for representing the diameter of national standard spiral steel pipes. One is to directly represent it through the outer di

With the continuous development of engineering construction in our country, foundation pit support has emerged in large numbers in engineering project

The steel sheet piles produced by the rolling cold bending method are one of the main products that use cold formed steel in civil engineering.